Cable Shift Installation Instructions for: ididit Column to C-4 Transididit inc. 610 S. Maumee St. Tecumseh, MI 49286PH: 517-424-0577 FAX: 517-424-72
Before installation please read:Melted Cables: If your cable is too close to your exhaust it will melt or become brittle. If this is the case you wi
1. Remove the 4 screws from the shift lever at the bottom of the steering column and set the screws and the lever safely aside. 2. Take the cable br
36. Push the cable down through its outer cover so that it will be as short as possible. Put the column in Park. Now, gure out where you want the
11. Take the small nut, two rubber boots and one large nut and washer off the transmission end of the cable. Insert the cable into the bracket. Rei
5Warnings!!! Please read!!!Melted Cables: If your cable is too close to your exhaust it will melt or become brittle. If this is the case you will ne
6Think you may have forgotten something? Here’s what you may have missed:Add Ons: (Add Ons should be installed on the column prior to shipment) Crui
If you are having problems with your installation please contact us at:PH: (517) 424-0577 or email: [email protected] 8:30a-5:30p ESTSat. 10:00a
Kommentare zu diesen Handbüchern